MAX4896ETP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.702W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4896 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 960mA |
| Power Supplies | 3/5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 410mA |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 3 Ω |
| Height | 750μm |
| Length | 5.1mm |
| Width | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4896ETP+ Overview
As you can see, it's packaged in the way of a Tube.There is a 20-WQFN Exposed Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 8.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Status Flag features.This object belongs to the MAX4896 family.As a result, there are 20 terminations.During operation, the 20 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 960mA when operation criteria are met.The supply voltage can be 3.6V for high efficiency.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 20 pins.The LED driver has 3Ohm resistance.In this case, the output current is set to 200mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 3/5V.It can handle a maximum voltage of 5.5VV.It is also capable of running at 2.7V volts if necessary.
MAX4896ETP+ Features
Supplied from 3.6V
Resistance of 3Ohm
MAX4896ETP+ Applications
There are a lot of Maxim Integrated MAX4896ETP+ Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Portable Video Game Players
- Portable GPS
- Notebook PC
- Set-top-box
- Hot Swap
- Solid State Drivers
- Portable GPS Device
- PC Card Hot Swap
