MAX489EESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX489 |
| Pin Count | 14 |
| Output Voltage | 3V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 250μA |
| Propagation Delay | 250 ns |
| Logic Function | Receiver |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX489EESD+T Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The package of this receiver is Tape & Reel (TR).Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.75V~5.25V for power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.It is packaged with 14 pinouts that are market standard for this particular transceiver.MAX489 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.14-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers in total implemented by this IC.At 3V, Wide receiver is able to deliver voltage to the load.
MAX489EESD+T Features
Tape & Reel (TR) package
14 pin count
14 pins
5V power supply
MAX489EESD+T Applications
There are a lot of Maxim Integrated MAX489EESD+T Drivers/Receivers/Transceivers applications.
- Thermal management
- High-speed computer links
- Wireless teaching
- Fiber optic cable connection network
- Switches
- Tuner
- Fiber-to-the-desktop
- Wired telephone
- Long-distance fiber optic network applications
- Precision engineering measurement
