Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
540.001716mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Transceiver |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Line Driver or Receivers |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX490 |
Pin Count |
8 |
Output Voltage |
12.5V |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Interface |
RS-422, RS-485 |
Operating Supply Current |
300μA |
Nominal Supply Current |
300μA |
Output Current |
250mA |
Logic Function |
Receiver, Transceiver |
Data Rate |
2.5Mbps |
Output Characteristics |
TOTEM-POLE |
Differential Output |
YES |
Output Polarity |
COMPLEMENTARY |
Protocol |
RS422, RS485 |
Input Characteristics |
DIFFERENTIAL SCHMITT TRIGGER |
Number of Drivers/Receivers |
1/1 |
Driver Number of Bits |
1 |
Duplex |
Full |
Receiver Hysteresis |
70mV |
Simplex/Duplex |
Full Duplex |
Transmit Delay-Max |
60 ns |
Output Low Current-Max |
0.004A |
Number of Receivers |
1 |
High Level Input Current-Max |
0.000002A |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX490EESA+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Tube format.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.This transceiver is packaged with 8 market standard pinoutsMAX490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 8-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It is important to note that this ic receiver had a maximum resolution of 1 bits.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Driver ICs such as this one are designed to operate from 5V power sources.Additionally, there are 1 receivers included in the package.With this integrating circuit you can drive LEDs of a voltage of up to 300μA. It can be used to drive large displays.Using 12.5V as a voltage source, Wide receiver is able to deliver voltage.With the help of this bluetooth transceiver, you will be able to provide an output current of 250mA.
MAX490EESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX490EESA+ Applications
There are a lot of Maxim Integrated MAX490EESA+ Drivers/Receivers/Transceivers applications.
- Remote controls
- Home theater wiring-free
- Fast Ethernet
- Long-distance fiber optic network applications
- Indoor ad hoc meeting
- Point-to-point networking
- WDM transmission
- Wireless 3D game
- Ethernet circuitry
- Mainframes, workstations or storage devices