MAX4948ETG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4948 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Number of Circuits | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10μA |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 5.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 15pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 800ns, 800ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 800ns |
| Switch-off Time-Max | 800ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4948ETG+T Overview
As the electronic part is packed in 24-WFQFN Exposed Pad, international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. Totally, there are 24 terminations. High-quality output is provided by the electronic component's 6 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. There are 24 pins injected into the electronic part body. SPDT switching circuits are used in these analog switch ics. 6 circuits are used in this analogue multiplexer. Try searching with MAX4948 to find analog multiplexer variants. This digital multiplexer has 5.5Ohm internal resistance. For details about the functions of 24 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 5.5V to a switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.8V. The switch device would be able to operate with 10μA current. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX4948ETG+T Features
6 Channels
Switch Circuit: SPDT
10μA Supply Current
-3db Bandwidth: 300MHz
MAX4948ETG+T Applications
There are a lot of Maxim Integrated MAX4948ETG+T Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Fiber to the Home
- ATM
- PBX interfaces
- Sample hold systems
- ISDN NT1/TA
- E1 Network Equipment
- Fault Tolerant Systems
- Cable PC
- USB 1.1 signal switching circuits
