MAX4968BEXB+T
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 34Ohm |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.97W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4968 |
| Number of Circuits | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.37V |
| Max Supply Current | 50μA |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 3.5 μs |
| Max Dual Supply Voltage | 12.5V |
| -3db Bandwidth | 30MHz |
| On-State Resistance (Max) | 34Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 3.5μs |
| Charge Injection | 150pC |
| Channel-to-Channel Matching (ΔRon) | 1.02 Ω |
| Crosstalk | -69dB @ 5MHz |
| Voltage - Supply, Single (V+) | 10V~12.5V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LFBGA |
| Weight | 170.210537mg |
| Operating Temperature | -40°C~85°C TA |
MAX4968BEXB+T Overview
The electrical component comes in 64-LFBGA packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A SPST - NO switching circuit is used to build these analog multiplexers. There are 16 circuits in this switch device. Try searching for the analog switch ic with MAX4968 if you are looking for variants. As far as internal resistance is concerned, it has 34Ohm. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.37V is the lowest voltage the electrical component should receive. A voltage of 10V~12.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 50μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 12.5VIt is recommended that you attach at least 10V to your dual power supply.
MAX4968BEXB+T Features
Switch Circuit: SPST - NO
-3db Bandwidth: 30MHz
MAX4968BEXB+T Applications
There are a lot of Maxim Integrated MAX4968BEXB+T Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Precision data acquisition
- FTTH
- Fiber to the Home
- Sample hold systems
- Channelized and Unchannelized DS3 applications
- Communications systems
- New designs requiring multiplexer functions
- Video signal routing
- Audio signal routing
