MAX4968CEXB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| HTS Code | 8542.39.00.01 |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4968 |
| JESD-30 Code | S-PBGA-B64 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 16 |
| -3db Bandwidth | 30MHz |
| On-State Resistance (Max) | 34Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| On-state Resistance Match-Nom | 0.54Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 3.5μs |
| Charge Injection | 150pC |
| Channel-to-Channel Matching (ΔRon) | 1.02 Ω |
| Crosstalk | -69dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 3500ns |
| Voltage - Supply, Single (V+) | 10V~12.5V |
| Height Seated (Max) | 1.3mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
MAX4968CEXB+T Overview
Shipping overseas is convenient with the electronic component packed in 64-LFBGA. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. 64 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. Based on SPST - NO switching circuits, these analog multiplexers work. A total of 16 circuits make up this switch device. Search with MAX4968 if you are looking for analog multiplexer variants. This analogue multiplexer requires a voltage of 10V~12.5V when it drains from a single voltage supply.
MAX4968CEXB+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 30MHz
MAX4968CEXB+T Applications
There are a lot of Maxim Integrated MAX4968CEXB+T Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- ISDN NT1/TA
- E1 Multiplexer
- Precision data acquisition
- Central office
- Audio and video signal routing
- 65 V DACs
- Sample-and-hold systems
- DVD-R
- PBX interfaces
