MAX4996LETG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.228W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 3 |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX4996 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 5μA |
| Nominal Supply Current | 10μA |
| Turn On Delay Time | 6 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 100 μs |
| -3db Bandwidth | 670MHz |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 150mA |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Current - Leakage (IS(off)) (Max) | 250nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 4pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 100μs, 6μs |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100000ns |
| Voltage - Supply, Single (V+) | 2.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4996LETG+T Overview
As the electronic part is packed in 24-WFQFN Exposed Pad, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:2 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Totally, there are 24 terminations. DPDT switching circuits are used in these analog switch ics. Circuits number 3 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4996. Analog switches have 4Ohm internal resistance. Datasheets for 24 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.5V. This multiplexer would work with 5μA current. An analogue multiplexer drains from a single voltage supply at 2.5V~5.5V.
MAX4996LETG+T Features
Switch Circuit: DPDT
5μA Supply Current
-3db Bandwidth: 670MHz
MAX4996LETG+T Applications
There are a lot of Maxim Integrated MAX4996LETG+T Analog Switches & Multiplexers ICs applications.
- CSU
- Cellular phones
- PCMCIA cards
- Medical
- High reliability control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fiber In The Loop (FITL)
- PDH Multiplexers
- PBXs
- Isolation
