MAX5003EEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX5003 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.75V~18.75V |
| Control Features | Frequency Control, On Time Control, Soft Start |
| Input Voltage (Min) | 7.4V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1.2MHz |
| Max Duty Cycle | 75 % |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5003EEE+ Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 10.75V~18.75V and has a 10.75V~18.75V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller is capable of switching at the 50kHz~300kHz position. The Surface Mount makes it ideal for general dc dc regulator. Frequency Control, On Time Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. MAX5003 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 7.4V. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. It is set to 75 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The max frequency of the pmic can reach 1.2MHz.
MAX5003EEE+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~300kHz
Frequency Control, On Time Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
MAX5003EEE+ Applications
There are a lot of Maxim Integrated MAX5003EEE+ DC to DC converter applications.
- USB circuits
- Linear guide
- Wide-range voltage regulation circuits
- Imported equipment
- Plate bending machines
- Gear/thread machining machines
- Milling machines
- Smoke prevention equipment
- Electrical distribution systems
- Mobile phones
