MAX5021EPA
| Parameters | |
|---|---|
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 11V~28V |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 262kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX5021 |
| JESD-30 Code | R-PDIP-T8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
MAX5021EPA Overview
The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 11V~28V. Suitable for a -40°C~85°C TA dc switcher. Switching can be done at 262kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Through Hole. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 8. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 12V. Searching "MAX5021" will return other relevant dc to dc converter ics. Voltages 28V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 250mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. The Through Hole makes DC switcher suitable for most applications and prototypes.
MAX5021EPA Features
Transistor Driver Outputs
Switching Frequency: 262kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX5021EPA Applications
There are a lot of Maxim Integrated MAX5021EPA DC to DC converter applications.
- Series voltage regulation circuits
- Window air conditioners
- Die casting equipment
- Network technology
- Computed tomography (CT)
- Serial communication converter
- Electric heating, lighting
- Servo drive system
- Game consoles
- Post equipment
