MAX5039EUA-T
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Applications | Processor |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5039 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 11.822.53/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Adjustable Threshold | YES |
| Current - Supply | 1.3mA |
| Supply Current-Max (Isup) | 2.25mA |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
MAX5039EUA-T Overview
It is acceptable to ship using the method Tape & Reel (TR) .packaged the power management in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation, it is easy to transport.The Surface Mount mounting method allows for easy adaptation.It is intended to be used at Processor as well as for other applications.Ideally, the operating temperature of the power management ic should be set at -40°C~85°C in order to prevent malfunction.The power management works at 2.5V~5.5V voltage.Check out search MAX5039 for more power ic's pin-to-pin solutions.There are 8 terminals on the power management.As an analog IC with a POWER SUPPLY SUPPORT CIRCUIT value, the instruments designs has been widely praised.The power manager can perform numerous demanding tasks when supplied with 5V voltage.This power ic has 8 pins in its pinout.The ics supply is a part of Power Management Circuits .In order for the power ic to work correctly, its supply current must be conducted at 1.3mA .In order for it to come up, the ic supplies must have at least 2.5V .Keeping output quality is the responsibility of 2 channels working together.In addition, you should not supply the power supply ic with a voltage greater than 5.5V .For the power management chip to run, 11.822.53/5V power supplies are sufficient.
MAX5039EUA-T Features
Mainly used in Processor applications
Operating temperature: -40°C~85°C
POWER SUPPLY SUPPORT CIRCUIT analog IC
MAX5039EUA-T Applications
There are a lot of Maxim Integrated MAX5039EUA-TPower Management applications.
- GPS
- Optical imaging payload
- LP2996-N: DDR1 Termination Voltage
- Netbooks
- Hand-Held Systems
- Motherboard
- Industrial Telemetry Applications
- Tablet PCs
- Switches
- System Health Prognostics
