MAX5041BEAI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5041 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Clock Sync | No |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX5041BEAI Overview
The switching controller fits in the 28-SSOP (0.209, 5.30mm Width) package and is ideal for most applications. 2 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.75V~28V. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 250kHz 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Phase Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 28 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "MAX5041", there are other relevant dc to dc converter ics you can find. In total, switching converter has 28 pins. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.75V. According to the test statistics, DC regulator outputs 3.3V voltage. Voltages 5.5V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 60A, so you should note it down when starting a new project. This Surface Mount makes DC switcher suitable for most prototypes and applications.
MAX5041BEAI Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable, Phase Control
PULSE WIDTH MODULATION
MAX5041BEAI Applications
There are a lot of Maxim Integrated MAX5041BEAI DC to DC converter applications.
- Balance equipment
- Handheld GPS
- Alternators
- Scientific research
- Electrical power transmission
- Linear guide
- Packaging
- ATMs
- Printing
- Digital display device
