MAX5048BATT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Voltage - Supply | 4V~12.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX5048 |
| Pin Count | 6 |
| Max Output Current | 7.6A |
| Nominal Supply Current | 1.5mA |
| Output Current | 6.85μA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 82ns |
| Fall Time (Typ) | 12.5 ns |
| Rise / Fall Time (Typ) | 82ns 12.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.027 µs |
| Output Peak Current Limit-Nom | 7.6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 7.6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.027 µs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5048BATT+T Overview
The 6-WDFN Exposed Pad package offers greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).There are 1 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~12.6V.There is a gate type of N-Channel MOSFET in this design.-40°C~150°C TJ is the allowed temperature range for this device.A type of Inverting, Non-Inverting is used for input in this program.Its configuration starts with 6 terminations.You will find various related parts under the base part number MAX5048.Mosfet driver is mounted using the Surface Mount method.There are 6 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 7.6A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The number of component pins is 6.6.85μA is the maximum output current supported by the device.Based on the maximum power dissipation of 1.454W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.
MAX5048BATT+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
6 pins
Maximum power dissipation of 1.454W
MAX5048BATT+T Applications
There are a lot of Maxim Integrated MAX5048BATT+T gate drivers applications.
- Multicolor LED/laser displays
- Topologies
- Industrial Motor Inverter - Power Tools, Robotics
- PCMCIA applications
- Digitally controlled power supplies
- Telecom switch mode power supplies
- Isolated Gate Driver Supplies
- DC/DC converters
- Uninterruptible Power Supplies (UPS)
- Video amplifiers
