MAX5055AASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.538W |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5055 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Max Supply Current | 4mA |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5055AASA+ Overview
The 8-SOIC (0.154, 3.90mm Width) Exposed Pad package provides greater flexibility.There is a package in the form of Tube.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.The device is mounted in the direction of Surface Mount.WGate driversh a 4V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Inverting is used.Its configuration starts with 8 terminations.Numerous related parts are available for its base part number MAX5055.Mosfet driver is mounted using the Surface Mount method.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to function with a supply voltage of 4.5V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Based on its maximum power dissipation of 1.538W, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 4mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 4/15V.
MAX5055AASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1.538W
MAX5055AASA+ Applications
There are a lot of Maxim Integrated MAX5055AASA+ gate drivers applications.
- Digitally controlled power supplies
- Motor controllers
- Smart Phones
- Telecom switch mode power supplies
- High frequency line drivers
- Portable Media Players
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Commercial and agricultural vehicles (CAV)
- High power buffers
