MAX5055AASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.538W |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5055 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Max Supply Current | 4mA |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5055AASA+T Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) Exposed Pad is used.There is a package in the form of Tape & Reel (TR).Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Its recommended mounting way is Surface Mount.When the supply voltage is 4V~15V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Inverting is used.8 terminations constitute its foundation.You will find various related parts under the base part number MAX5055.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 4.5V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 4A.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 8 component pins is available.Using 1.538W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The supply current should be kept at 4mA to ensure higher stability.The power supply of 4/15V is able to solve the power supply problems for a wide variety of applications.
MAX5055AASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1.538W
MAX5055AASA+T Applications
There are a lot of Maxim Integrated MAX5055AASA+T gate drivers applications.
- Welding
- serial peripheral interface (SPI), I2C
- Digitally controlled power supplies
- 3-Phase Motor Inverter Driver
- Motor Drives
- Topologies
- PCMCIA applications
- Solar power supplies
- Isolated Gate Driver Supplies
- High-speed communications
