MAX5056BASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5056 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5056BASA+ Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the packaging method.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~15V supply voltage.There is a gate type of N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is the input type used in this program.Initially, the configuration is composed of 8 terminations.Under its base part number MAX5056, various related parts can be found.Devices are mounted by Surface Mount.When the device is designed, it has 8 pins.A supply voltage of 4.5V is required for operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 4A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.Using 471mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Due to its power supply of 4/15V, it provides an effective solution to power supply problems for a wide range of applications.
MAX5056BASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX5056BASA+ Applications
There are a lot of Maxim Integrated MAX5056BASA+ gate drivers applications.
- Dual-Battery Systems
- Portable Navigation Devices
- Motor Control
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Topologies
- Portable computers
- Motor controllers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
