MAX5060ATI-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX5060 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 125kHz~1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.5MHz |
| Duty Cycle | 90 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5060ATI-T Overview
As a result of 28-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.75V~28V and has a 4.75V~28V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Using this switching controller, it is possible to switch at 125kHz~1.5MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at QUAD. Different dc switching's functions can be applied to 28 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics can be found by searching "MAX5060". The switching converter has a total of 28 pins. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.75V. Statistically, DC regulator outputs 5.5V volts. In most cases, the dc dc regulator's output current is 30A. This information should be noted when you begin working with the component. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator1.5MHz has the maximum frequency. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V.
MAX5060ATI-T Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
MAX5060ATI-T Applications
There are a lot of Maxim Integrated MAX5060ATI-T DC to DC converter applications.
- Automatic plug-in machines
- Cutting machine tools
- Planers
- Electrical power transmission
- Fire elevators
- CMM
- Pipe bending machines
- Production lines
- Adjustable voltage or current linear circuits
- Imported equipment
