MAX5060ATI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5060 |
| JESD-30 Code | S-XQCC-N28 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 30A |
| Frequency - Switching | 125kHz~1.5MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5060ATI+T Overview
Capsuled in the 28-WFQFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. 4.75V~28V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~125°C TJ. In this switching controller, the switch can be set to 125kHz~1.5MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a QUAD terminal on the switching converters. A variety of 28 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 5V. MAX5060 can be used to locate other relevant dc to dc converter ics. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4.75V is the minimum required for the dc dc voltage regulator. At most, the dc to dc regulator accepts 5.5V input voltage. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY. 30A is the largest value switching converter outputs.
MAX5060ATI+T Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY
MAX5060ATI+T Applications
There are a lot of Maxim Integrated MAX5060ATI+T DC to DC converter applications.
- Large fire protection systems
- Medical monitoring systems
- Correction machines
- Special machining machine tools
- Access control systems
- Terrestrial set-top boxes
- Grinders
- Computer application technology
- Communication system
- Flaw detection equipment
