MAX5060ETI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5060 |
| JESD-30 Code | S-XQCC-N28 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 30A |
| Frequency - Switching | 125kHz~1.5MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5060ETI+T Overview
It comes in a 28-WFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.75V~28V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~85°C TA dc switcher. Switching can be done at 125kHz~1.5MHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. An array of 28 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics will be returned if you search "MAX5060". In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.75V. It should be noted that the dc to dc regulator only accepts 5.5V voltage as input voltage. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY to better satisfy the requirement. The output of this function is the greatest value of 30A.
MAX5060ETI+T Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY
MAX5060ETI+T Applications
There are a lot of Maxim Integrated MAX5060ETI+T DC to DC converter applications.
- Smoke exhaust equipment
- Grinders
- Post equipment
- Combined machine tools
- Window air conditioners
- Various CNC machine tools
- Milling machines
- Series voltage regulation circuits
- Cutting machine tools
- Bending machines
