MAX5061AUE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5061 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 30A |
| Frequency - Switching | 125kHz~1.5MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX5061AUE Overview
With a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.75V~28V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 125kHz~1.5MHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. MAX5061 can be searched for other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.75V. The dc to dc regulator can only accept a maximum input voltage of 5.5V. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY to better satisfy the requirement. Switching converter outputs current to the greatest value of 30A.
MAX5061AUE Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY
MAX5061AUE Applications
There are a lot of Maxim Integrated MAX5061AUE DC to DC converter applications.
- Fire elevators
- Balance equipment
- Solar power plants
- Planers
- Current source circuits
- Motor controller circuits
- Printing
- Digital display device
- Automatic testing equipment
- Overvoltage protection circuits in TV sets
