MAX5061EUE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5061 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 125kHz~1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.5MHz |
| Duty Cycle | 90 % |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5061EUE+T Overview
With its 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.75V~28V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 125kHz~1.5MHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . 16 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Other relevant dc to dc converter ics can be found by searching "MAX5061". There are only 16 pins on switching converter. This dc dc voltage regulator should be powered by a voltage of 4.75V. DC regulator outputs 5.5V voltage according to the test statistics. The dc dc regulator's usual output current is 30A, which should be noted down when you start a project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The max frequency of the pmic can reach 1.5MHz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY in order to better satisfy the requirement. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V.
MAX5061EUE+T Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5.5V; ALSO OPERATES WITH 7 TO 28 VLOT SUPPLY
MAX5061EUE+T Applications
There are a lot of Maxim Integrated MAX5061EUE+T DC to DC converter applications.
- Grinders
- Alternators
- Hydraulic presses
- Motor controller circuits
- Combined machine tools
- Refrigerators of central air conditioners
- Communication system
- Gear/thread machining machines
- Electric heating, lighting
- Smart grid
