MAX5062AASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX5062 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 70μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 40 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.063 µs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5062AASA+ Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.There is a package in the form of Tube.For its configuration, it incorporates 2 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 8V~12.6V supply voltage, its superiority can be demonstrated.Gate type N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as the input type in this program.The configuration is based on 8 terminations.You will find various related parts under the base part number MAX5062.Mosfet driver is mounted using the Surface Mount method.A total of 8 pins are available on the device.The device is specifically designed to function with a supply voltage of 12V V.There is a maximum output current of 2A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The component has 8 pins.Maximum (Bootstrap) voltage is 125V.The device is capable of delivering a current of 2A.Based on the maximum power dissipation of 470.6mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To increase stability, keep the supply current at 3mA.
MAX5062AASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 470.6mW
MAX5062AASA+ Applications
There are a lot of Maxim Integrated MAX5062AASA+ gate drivers applications.
- Portable computers
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Commercial and agricultural vehicles (CAV)
- Broadcast equipment
- Multicolor LED/laser displays
- Portable Navigation Devices
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Control
- Power factor correction (PFC) circuits
