MAX5062AASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX5062 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.063 µs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5062AASA+T Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the package.This device is equipped with 2 drivers for its configuration.It's mounted on the way to Surface Mount.WGate driversh a 8V~12.6V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.Input type of Non-Inverting is used.There are 8 terminations to form the base of its configuration.There are various related parts under its base part number MAX5062.In this case, Surface Mount indicates how the device is to be mounted.A total of 8 pins are available on the device.A supply voltage of 12V is required for operation.There is an output current limit of 2A for this device.Its subcategory of MOSFET Drivers contains various useful electronic components.On the board, there are 8 component pins.Ideally, the high-side voltage should not exceed 125V.Based on the maximum power dissipation of 470.6mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 3mA in order to achieve greater stabilMosfet gate driversy.
MAX5062AASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 470.6mW
MAX5062AASA+T Applications
There are a lot of Maxim Integrated MAX5062AASA+T gate drivers applications.
- Broadcast equipment
- Active filtering
- serial peripheral interface (SPI), I2C
- Portable Media Players
- RGB applications
- Welding
- LCD/LCoS/DLP portable and embedded pico projectors
- Head-up and Head mounted displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-voltage isolated DC-DC converters
