MAX5062BASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5062 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5062BASA+ Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tube represents the package.The configuration is supported by 2 drivers.Gate drivers is mounted in the way of Surface Mount.Using a 8V~12.6V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number MAX5062, various related parts can be found.The mount method is Surface Mount.At the time of design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.In the maximum case, the output current can be limited to 2A.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.Ideally, the high-side voltage should not exceed 125V.Using 470.6mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Keeping the supply current at 3mA ensures greater stability.
MAX5062BASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 470.6mW
MAX5062BASA+ Applications
There are a lot of Maxim Integrated MAX5062BASA+ gate drivers applications.
- Solar power supplies
- Isolated Supplies for controller area network (CAN),
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Dual-Battery Systems
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- Uninterruptible Power Supplies (UPS)
- UPS systems
