MAX5062CASA+
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5385W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX5062 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX5062CASA+ Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used.A package of Tube has been used.For its configuration, it incorporates 2 drivers.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 8V~12.6V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.There is a temperature range for this device of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.Numerous related parts can be found under its base part number MAX5062.Devices are mounted by Surface Mount.Devices have 8 pins available.In order to operate, a voltage of 12V has to be applied.Mosfet driver is possible to achieve a maximum output current of 2A.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Max (Bootstrap) can be as high as 125V.Considering its maximum power dissipation, 1.5385W shows its maximum capacity to transfer and conduct power loss without overheating.To maintain higher stability, the supply current should always be 3mA.
MAX5062CASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.5385W
MAX5062CASA+ Applications
There are a lot of Maxim Integrated MAX5062CASA+ gate drivers applications.
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
- serial peripheral interface (SPI), I2C
- Multicolor LED/laser displays
- AC-DC Inverters
- Digitally controlled power supplies
- Industrial Power Supplies
- Motor Control
- Welding
- Industrial Modules
