MAX5063BASA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5063 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 140μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5063BASA Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tube is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8V~12.6V supply voltage.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.-40°C~150°C TJ is the allowed temperature range for this device.The input type is Inverting, Non-Inverting.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number MAX5063.Devices are mounted by Surface Mount.When the device is designed, it has 8 pins.A voltage of 12V is required for its operation.In the maximum case, the output current can be 2A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.On the board, there are 8 component pins.High-side voltage - Max (Bootstrap) can be as low as 125V.Mosfet driver supports an output current of 2A.Based on its maximum power dissipation of 470.6mW, it is clear that it is capable of transferring and conducting power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 3mA.
MAX5063BASA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 470.6mW
MAX5063BASA Applications
There are a lot of Maxim Integrated MAX5063BASA gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- General Purpose 3-Phase Inverter
- Motor controllers
- Solar power supplies
- serial peripheral interface (SPI), I2C
- Portable computers
- A/D drivers
- Motor Controls
- Motor Control
- UPS systems
