MAX5063CASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX5063 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 140μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5063CASA+ Overview
The 8-SOIC (0.154, 3.90mm Width) Exposed Pad package offers greater flexibility.A package of Tube has been used.2 drivers are incorporated for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 8V~12.6V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number MAX5063.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.Mosfet driver is possible for the output current to be as low as 2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.High-side voltage - Max (Bootstrap) can be as low as 125V.This device is capable of delivering 2A current.Its maximum power dissipation of 1.5W also demonstrates its maximum ability to transfer power without overheating.As a precaution, make sure the supply current is kept at 3mA.
MAX5063CASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.5W
MAX5063CASA+ Applications
There are a lot of Maxim Integrated MAX5063CASA+ gate drivers applications.
- Welding
- RGB applications
- AC-DC Inverters
- Digitally controlled power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Solar inverters
- UPS systems
- Automotive Applications
- Commercial and agricultural vehicles (CAV)
- Portable Navigation Devices
