MAX5064AATC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.95W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX5064 |
| Pin Count | 12 |
| Max Output Current | 2A |
| Nominal Supply Current | 260μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height | 730μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5064AATC+ Overview
For greater flexibility, its 12-WQFN Exposed Pad package is used.The packaging method is indicated by Tube.For its configuration, it incorporates 2 drivers.There is a mounting bracket in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 8V~12.6V.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.As a result of its configuration, it contains a maximum of 12 terminations.There are various related parts under its base part number MAX5064.In this case, Surface Mount indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 12 pins when designing.The device is specifically designed to operate at 12V volts.In the maximum case, the output current can be 2A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 12 component pins.Ideally, the high-side voltage should not exceed 125V.2A is the maximum output current supported by the device.Having the maximum power dissipation of 1.95W indicates its maximum capacity to conduct power losses without overheating.As a precaution, make sure the supply current is kept at 3mA.
MAX5064AATC+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
12 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.95W
MAX5064AATC+ Applications
There are a lot of Maxim Integrated MAX5064AATC+ gate drivers applications.
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Multicolor LED/laser displays
- Commercial air-conditioning (CAC)
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Modules
- Motor controllers
- Refrigerator
- Isolated Supplies for Motor Control
- Smart Phones
