MAX5064BATC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.95W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX5064 |
| Pin Count | 12 |
| Max Output Current | 2A |
| Nominal Supply Current | 260μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.063 µs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5064BATC+ Overview
For greater flexibility, its 12-WQFN Exposed Pad package is used.Tube represents the package.The configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.A supply voltage of 8V~12.6V demonstrates its superiority.N-Channel MOSFET is the gate type used for this design.-40°C~150°C TJ is the allowed temperature range for this device.Inverting, Non-Inverting is used as its input type.It's configured with 12 terminations.The base part number MAX5064 refers to a number of related parts.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 12 pins when designing.Specification is for 12V supply voltage operation.2A is the maximum output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 12 component pins.A high-side voltage can be set up to 125V (Bootstrap).The output current of this device can be set to 2A.Considering its maximum power dissipation, 1.95W shows its maximum capacity to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 3mA.
MAX5064BATC+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
12 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.95W
MAX5064BATC+ Applications
There are a lot of Maxim Integrated MAX5064BATC+ gate drivers applications.
- Video amplifiers
- Isolated Gate Driver Supplies
- Motor Control
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Power factor correction (PFC) circuits
- High current laser/LED systems
- RGB applications
- 3-Phase Motor Inverter Driver
- Industrial Power Supplies
- Line drivers
