MAX5064BATC+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX5064 |
| Pin Count | 12 |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.063 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.063 μs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5064BATC+T Overview
Its 12-WQFN Exposed Pad package is adopted for higher flexibility.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 8V~12.6V V, it is able to demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.Its configuration starts with 12 terminations.Numerous related parts can be found under its base part number MAX5064.In this case, Surface Mount indicates how the device is mounted.A total of 12 pins are available on the device.Specification is for 12V supply voltage operation.In the maximum case, the output current can be limited to 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 12 pins for component connections.Ideally, the high-side voltage should not exceed 125V.Its maximum power dissipation of 1.9512W also demonstrates its maximum ability to transfer power without overheating.Keeping the supply current at 3mA ensures greater stability.
MAX5064BATC+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
12 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.9512W
MAX5064BATC+T Applications
There are a lot of Maxim Integrated MAX5064BATC+T gate drivers applications.
- Motor controllers
- RGB applications
- High-speed communications
- A/D drivers
- Portable computers
- White Goods - Air Conditioner, Washing Machine,
- Head-up and Head mounted displays
- Telecom switch mode power supplies
- Motor Controls
- Isolated Gate Driver Supplies
