MAX5065EAI+
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5065 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Enable, Phase Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
MAX5065EAI+ Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. 4.75V~28V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 250kHz 500kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable, Phase Control, Power Good. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 28 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. MAX5065 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 28. It is recommended that the input voltage of the dc dc voltage regulator be 4.75V. Statistically, the DC regulator outputs 3.3V voltage. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. In most cases, the output current of the dc dc regulator will be 4A, so note that when you start the project. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably.
MAX5065EAI+ Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable, Phase Control, Power Good
PULSE WIDTH MODULATION
MAX5065EAI+ Applications
There are a lot of Maxim Integrated MAX5065EAI+ DC to DC converter applications.
- Smart grid
- CMM
- Energy management systems
- Domestic water pumps
- Computer rooms
- Magnetohydrodynamic power
- Pipe bending machines
- Electrical power transmission
- Communication system
- Large fire protection systems
