MAX5068BAUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5068 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 72V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~1.25MHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 1.25MHz |
| Max Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5068BAUE+ Overview
This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 10.8V~24V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 25kHz~1.25MHz. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Dead Time Control, Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. MAX5068 can be used to locate other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. A maximum voltage of 24V is accepted by the dc to dc regulator as an input voltage. You should note that the dc dc regulator's usual output current is 1A. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 1.25MHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 72V to the voltage regulator dc to dc.
MAX5068BAUE+ Features
Transistor Driver Outputs
Switching Frequency: 25kHz~1.25MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX5068BAUE+ Applications
There are a lot of Maxim Integrated MAX5068BAUE+ DC to DC converter applications.
- Motor controller circuits
- Current source circuits
- Energy management systems
- Power supplies of electronic gadgets
- Overvoltage protection circuits in TV sets
- Hydrogen power
- Emergency lighting monitoring equipment
- Post equipment
- CMM
- Laboratories
