MAX5069BAUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2.5MHz |
| Base Part Number | MAX5069 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 72V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 1.702W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 23.6V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069BAUE+ Overview
With a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 10.8V~24V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 50kHz~2.5MHz position. dc dc regulator can be generalized using Surface Mount. Dead Time Control, Enable, Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "MAX5069" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. A frequency of 2.5MHz is set for the switching controller. To run the voltage regulator dc to dc safely and reliably, users should apply 72V to the voltage regulator dc to dc. A nominal working status is achieved when the input voltage is set to 23.6V.
MAX5069BAUE+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2.5MHz
MAX5069BAUE+ Applications
There are a lot of Maxim Integrated MAX5069BAUE+ DC to DC converter applications.
- Arc suppression circuits
- Shearing machines
- Domestic water pumps
- Surface processing equipment
- Laboratories
- Computed tomography (CT)
- Medical equipment
- Grinders
- Milling machines
- Digital precision reference circuits
