MAX5069BAUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5069 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 72V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069BAUE+T Overview
With a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 10.8V~24V volts and has 10.8V~24V supply voltage. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 50kHz~2.5MHz position. dc dc regulator can be generalized using Surface Mount. Dead Time Control, Enable, Frequency Control is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "MAX5069". There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The dc to dc regulator can only accept 24V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 2.5MHz. A circuit should contain 72V in order to ensure the voltage regulator dc to dc runs safely and reliably.
MAX5069BAUE+T Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX5069BAUE+T Applications
There are a lot of Maxim Integrated MAX5069BAUE+T DC to DC converter applications.
- Various CNC machine tools
- Imported equipment
- Automatic testing equipment
- Balance equipment
- USB circuits
- Correction machines
- Handheld GPS
- Adjustable voltage or current linear circuits
- Telecommunications equipment
- Digital precision reference circuits
