MAX5069CAUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.702W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2.5MHz |
| Base Part Number | MAX5069 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 1.702W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069CAUE+ Overview
The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 10.8V~24V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. This switching controller can switch at 25kHz~1.25MHz. The Surface Mount allows it to be used for dc dc regulator in general. Dead Time Control, Enable, Frequency Control provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 12V is input. Search for "MAX5069" to find other relevant dc to dc converter ics. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. You should note that the dc dc regulator's usual output current is 1A. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 2.5MHz Hz. It is possible to set the input voltage as 12V for nominal working statuses.
MAX5069CAUE+ Features
Transistor Driver Outputs
Switching Frequency: 25kHz~1.25MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2.5MHz
MAX5069CAUE+ Applications
There are a lot of Maxim Integrated MAX5069CAUE+ DC to DC converter applications.
- Computer application technology
- Current source circuits
- Program control systems
- Smoke exhaust equipment
- Computer monitoring equipment of building
- Overvoltage protection circuits in TV sets
- Constant current circuits
- Machining centers
- Product burn-in
- Boring machines
