MAX5069DAUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.702W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2.2MHz |
| Base Part Number | MAX5069 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 1.7W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 24V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069DAUE+ Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tube surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 10.8V~24V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Using this switching controller, it is possible to switch at 25kHz~1.25MHz. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Dead Time Control, Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "MAX5069". There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. The switching controller works at a frequency of 2.2MHz. Users should apply 24V to operate the voltage regulator dc to dc safely and reliably. It is possible to set the input voltage as 24V for nominal working statuses.
MAX5069DAUE+ Features
Transistor Driver Outputs
Switching Frequency: 25kHz~1.25MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2.2MHz
MAX5069DAUE+ Applications
There are a lot of Maxim Integrated MAX5069DAUE+ DC to DC converter applications.
- Elevator lighting
- Ball screw pair
- Handheld GPS
- Medical equipment
- Boring machines
- USB circuits
- Smoke exhaust equipment
- Household control circuits
- Driver circuits
- Industrial robots
