MAX5069DAUE-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5069 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~1.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069DAUE-T Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. A 10.8V~24V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~125°C TJ. It can switch at 25kHz~1.25MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Dead Time Control, Enable, Frequency Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "MAX5069" will reveal other relevant dc to dc converter ics. In total, switching converter has 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 2.5MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 24V.
MAX5069DAUE-T Features
Transistor Driver Outputs
Switching Frequency: 25kHz~1.25MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX5069DAUE-T Applications
There are a lot of Maxim Integrated MAX5069DAUE-T DC to DC converter applications.
- Computer monitoring equipment of building
- Smoke exhaust equipment
- Series voltage regulation circuits
- Grinders
- Geothermal power
- Communication system
- Bending machines
- Drilling machines
- Nuclear power plants
- Constant current circuits
