MAX5070AAUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5070 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~30V |
| Control Features | Frequency Control |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5070AAUA+T Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 10.8V~30V and has a 10.8V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. There is a switch at 20kHz~1MHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 15V is input. A search for "MAX5070" will reveal other relevant dc to dc converter ics. 8 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The dc to dc regulator can only accept 25V input voltage. You should note that the dc dc regulator's usual output current is 2A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 97.5 % during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 1MHz. When running the voltage regulator dc to dc in a circuit, users should apply 30V to ensure safety and reliability.
MAX5070AAUA+T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
MAX5070AAUA+T Applications
There are a lot of Maxim Integrated MAX5070AAUA+T DC to DC converter applications.
- Linear guide
- Computer-related products
- Hydro power
- Magnetohydrodynamic power
- Mobile phones
- Textile machinery
- Laboratories
- Geothermal power
- Sink circuits
- Driver circuits
