MAX5071BAUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5071 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~30V |
| Control Features | Frequency Control |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49.8% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5071BAUA+T Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 10.8V~30V. Suitable for work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 20kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "MAX5071" will return other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc to dc regulator accepts only 25V input voltage at most. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 1MHz. It is suggested that users apply 30V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
MAX5071BAUA+T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX5071BAUA+T Applications
There are a lot of Maxim Integrated MAX5071BAUA+T DC to DC converter applications.
- Automatic plug-in machines
- Geothermal power
- Terrestrial set-top boxes
- Hydro power
- Product burn-in
- Medical monitoring systems
- Communication system
- Program control systems
- Planers
- Analog precision reference circuits
