MAX5073ETI+T
| Parameters | |
|---|---|
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Switcher Configuration | BUCK-BOOST |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX5073 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 28V |
| Output Type | Adjustable |
| Operating Supply Voltage | 23V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 5.2V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 1.38A Switch 2.3A Switch |
| Max Output Voltage | 28V |
| Voltage - Output (Min/Fixed) | 0.8V |
MAX5073ETI+T Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. During the development of this harley voltage regulator, 28 terminations were made. There is a DUAL SWITCHING CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this harley voltage regulator is available in the 28-WFQFN Exposed Pad package. 2 outputs have been configured in the voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. There is a switching frequency of 200kHz~2.2MHz for this voltage regulator 12v. Despite its low input voltage, this voltage regulator can operate. DC DC switching regulator's output voltage (Min/Fixed) amounts to 0.8V. Featuring a maximum design flexibility of 1.38A Switch 2.3A Switch, dc to dc voltage regulator has a maximum output current of 1.38A Switch 2.3A Switch. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. For operation, switching regulator requires a nominal input voltage of 5.2V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. The MAX5073 family of DC/DC regulators includes this DC/DC regulator. Voltage of voltage regulator can be delivered at 28V volts. The switching regulator operation is carried out by 28 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 800mV. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 28V. An input voltage of 23V is used to operate this harley voltage regulator.
MAX5073ETI+T Features
2 outputs
Peak reflow temperature (Cel) of 260
28 pins
Operating supply voltage of 23V
MAX5073ETI+T Applications
There are a lot of Maxim Integrated MAX5073ETI+T Voltage Regulators applications.
- Low output voltage switching power supply circuits
- Computer rooms
- Printing
- Electrical power transmission
- Ball screw pair
- Terrestrial set-top boxes
- Automatic plug-in machines
- Network technology
- Packaging
- Current source circuits
