MAX5075AAUA+
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 825mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5075 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1mA |
| Output Current | 3A |
| Input Type | RC Input Circuit |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
MAX5075AAUA+ Overview
For greater flexibility, the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted.There is a package in the form of Tube.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~15V.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.RC Input Circuit is used as its input type.Its configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MAX5075.The device is mounted with Surface Mount.The pins are configured with 8 when designing the chip.The device is specifically designed to operate at 12V volts.Mosfet driver utilizes the interface IC HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 3A.There are several useful electronic components within its subcategory MOSFET Drivers.The board has a total of 8 component pins.The output current can be set to 3A.825mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.With its power supplies of 4.5/15V, it solves the power supply problems for diverse applications.
MAX5075AAUA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 825mW
MAX5075AAUA+ Applications
There are a lot of Maxim Integrated MAX5075AAUA+ gate drivers applications.
- High frequency line drivers
- White Goods - Air Conditioner, Washing Machine,
- Commercial air-conditioning (CAC)
- Refrigerator
- PCMCIA applications
- DC-DC Converters
- Portable computers
- Active filtering
- Broadcast equipment
- Digitally controlled power supplies
