MAX5075CAUA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 825mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5075 |
| Pin Count | 8 |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1mA |
| Input Type | RC Input Circuit |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX5075CAUA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The packaging method is indicated by Tube.Gate drivers is configured wGate driversh 2 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4.5V~15V, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver accepts input of type RC Input Circuit.The configuration starts with 8 terminations.You will find various related parts under the base part number MAX5075.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.There are several useful electronic components found in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.This device has a maximum power dissipation of 825mW, indicating that it is capable of reducing power loss without overheating.The power supply of 4.5/15V is able to solve the power supply problems for a wide variety of applications.
MAX5075CAUA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 825mW
MAX5075CAUA Applications
There are a lot of Maxim Integrated MAX5075CAUA gate drivers applications.
- Digitally controlled power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Topologies
- 3-Phase Motor Inverter Driver
- Commercial and agricultural vehicles (CAV)
- Video amplifiers
- Active filtering
- High current laser/LED systems
- Broadcast equipment
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
