MAX5075CAUA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 825mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5075 |
| Pin Count | 8 |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1mA |
| Input Type | RC Input Circuit |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX5075CAUA-T Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.A package of Tape & Reel (TR) has been used.Gate drivers is configured wGate driversh 2 drivers.Surface Mount is mounted in the way.WGate driversh a 4.5V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type RC Input Circuit.Mosfet driver is based on 8 terminations.Under its base part number MAX5075, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.A voltage of 12V is required for its operation.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.825mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Using its power supply of 4.5/15V, it provides solutions to diverse power supply problems.
MAX5075CAUA-T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 825mW
MAX5075CAUA-T Applications
There are a lot of Maxim Integrated MAX5075CAUA-T gate drivers applications.
- High-voltage isolated DC-DC converters
- PCMCIA applications
- AC-DC Inverters
- Commercial air-conditioning (CAC)
- Pulse transformer drivers
- RGB applications
- Isolated switch mode power supplies (SMPS)
- Industrial motor drives - compact, standard, premium, servo drives
- Topologies
- Motor Control
