MAX5077AUD+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5077 |
| Pin Count | 14 |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1mA |
| Input Type | RC Input Circuit |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5077AUD+T Overview
The 14-TSSOP (0.173, 4.40mm Width) Exposed Pad package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.This configuration includes 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.By using 4.5V~15V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses RC Input Circuit as Mosfet drivers input type.Initially, the configuration is composed of 14 terminations.There are various parts that can be found under its base part number MAX5077.Mosfet driver is mounted using the Surface Mount method.The pins are configured with 14 when designing the chip.With a supply voltage of 12V, it is designed to operate.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.Its subcategory of MOSFET Drivers contains various useful electronic components.A total of 14 pins are available for component connections.This device has a maximum power dissipation of 1.667W, indicating that it is capable of reducing power loss without overheating.Using its power supply of 4.5/15V, it provides solutions to diverse power supply problems.
MAX5077AUD+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
Maximum power dissipation of 1.667W
MAX5077AUD+T Applications
There are a lot of Maxim Integrated MAX5077AUD+T gate drivers applications.
- Video amplifiers
- High-voltage isolated DC-DC converters
- Automotive Applications
- A/D drivers
- Telecom switch mode power supplies
- Topologies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Controls
- Line drivers
- Portable Navigation Devices
