MAX5078BATT+T
| Parameters | |
|---|---|
| Nominal Supply Current | 40μA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.034 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.034 µs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.454W |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX5078 |
| Pin Count | 6 |
| Max Output Current | 4A |
MAX5078BATT+T Overview
In order to increase flexibility, the package 6-WDFN Exposed Pad is used.Tape & Reel (TR) represents the packaging method.For its configuration, it incorporates 1 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 6 terminations.There are numerous related parts listed under its base part number MAX5078.Mosfet driver is mounted using Surface Mount.A total of 6 pins are available on the device.The device is specifically designed to operate at 15V volts.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.An output current as high as 4A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.The board contains 6 pins for component connections.Having the maximum power dissipation of 1.454W indicates its maximum capacity to conduct power losses without overheating.
MAX5078BATT+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
6 pins
Maximum power dissipation of 1.454W
MAX5078BATT+T Applications
There are a lot of Maxim Integrated MAX5078BATT+T gate drivers applications.
- Pulse transformer drivers
- Industrial Modules
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- serial peripheral interface (SPI), I2C
- PCMCIA applications
- Isolated Supplies for Motor Control
- A/D drivers
- Isolated Supplies for controller area network (CAN),
- High current laser/LED systems
