MAX5094AASA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX5094 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX5094AASA-T Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 7.6V~30V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 20kHz~1MHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. Frequency Control provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. MAX5094 can be searched for other relevant dc to dc converter ics. Specifically, switching converter falls under the Switching Regulator or Controllers category. The dc to dc regulator can only accept 25V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. The maximum duty cycle of this voltage regulator dc to dc is set to 97.5 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 1MHz. As a result, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE so that the need can be met more directly.
MAX5094AASA-T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094AASA-T Applications
There are a lot of Maxim Integrated MAX5094AASA-T DC to DC converter applications.
- Domestic water pumps
- Access control systems
- Electrical distribution systems
- Product burn-in
- Terrestrial set-top boxes
- Alternators
- Printing
- Hydrogen power
- Serial communication converter
- Program control systems
