MAX5094AAUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 362mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | MAX5094 |
| Function | Step-Up/Step-Down |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 362mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 32μA |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Max Input Voltage | 26.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Nominal Input Voltage | 26.5V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Input Current | 3mA |
| Number of Output Phases | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5094AAUA+ Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 7.6V~30V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 20kHz~1MHz position. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Searching "MAX5094" will return other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. A 5V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controller operates at 1MHz Hz. DC to DC voltage regulator has the value of IT CAN ALSO OPERATE WITH CURRENT MODE to better satisfy the requirement. In dormant mode, 32μA is used. For nominal working status, the input voltage can be set as 26.5V. In order to limit the voltage of a dc switcher whose maximum input voltage is 26.5V, it must be limited by the user. It runs on a supply current of 3mA. With this controller, the phase is 1. It could be possible to satisfy the switching converter for operation with a current flow input of 3mA.
MAX5094AAUA+ Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 1MHz
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094AAUA+ Applications
There are a lot of Maxim Integrated MAX5094AAUA+ DC to DC converter applications.
- Automation technology
- Combined machine tools
- Digital display device
- Boring machines
- Smoke prevention equipment
- Precision electronic equipment
- Post equipment
- Computer-related products
- Driver circuits
- Grinders
