MAX5094AAUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | MAX5094 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5094AAUA+T Overview
It comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tape & Reel (TR) solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 20kHz~1MHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Searching "MAX5094" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. A maximum voltage of 25V is accepted by the dc to dc regulator as an input voltage. You should note down the dc dc regulator's usual output current of 1A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 97.5 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 1MHz. The value of DC to DC voltage regulator is set at IT CAN ALSO OPERATE WITH CURRENT MODE in order to fulfill the requirements more effectively.
MAX5094AAUA+T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
Frequency: 1MHz
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094AAUA+T Applications
There are a lot of Maxim Integrated MAX5094AAUA+T DC to DC converter applications.
- Shearing machines
- Balance equipment
- Automatic plug-in machines
- Precision electronic equipment
- Automation technology
- Product testing
- Wide-range voltage regulation circuits
- Direct power supply system
- Digital precision reference circuits
- Fire elevators
