MAX5094CASA+
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX5094 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
MAX5094CASA+ Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 7.6V~30V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 20kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Search for "MAX5094" to find other relevant dc to dc converter ics. There is a particular type of Switching Regulator or Controllers in switching converter. At most, the dc to dc regulator accepts 25V input voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 97.5 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 1MHz. For better satisfaction, the value of DC to DC voltage regulator is IT CAN ALSO OPERATE WITH CURRENT MODE.
MAX5094CASA+ Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094CASA+ Applications
There are a lot of Maxim Integrated MAX5094CASA+ DC to DC converter applications.
- Printing equipment
- Computer application technology
- Computer-related products
- Wind power
- Various precision measuring instruments
- Electrical power transmission
- Medical equipment
- Pipe bending machines
- Low output voltage switching power supply circuits
- Balance equipment
