MAX5094CAUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5094 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5094CAUA+ Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 7.6V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 20kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "MAX5094". In total, switching converter has 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It should be fully noted that the dc to dc regulator only accepts 25V input voltage at most. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. It is set to 97.5 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 1MHz. To better satisfy the need, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE.
MAX5094CAUA+ Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094CAUA+ Applications
There are a lot of Maxim Integrated MAX5094CAUA+ DC to DC converter applications.
- Flaw detection equipment
- Current source circuits
- Special machining machine tools
- Game consoles
- Arc suppression circuits
- Electric water heaters
- Direct power supply system
- Die casting equipment
- Automatic plug-in machines
- Handheld GPS
