MAX5094CAUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5094 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 96% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5094CAUA+T Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 20kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "MAX5094". Switching converter is a special type of Switching Regulator or Controllers. Considering the dc to dc regulator can only accept 25V input voltage, it is important to take note of this. In order to satisfy the need, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE. The output of this function is the greatest value of 2A.
MAX5094CAUA+T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5094CAUA+T Applications
There are a lot of Maxim Integrated MAX5094CAUA+T DC to DC converter applications.
- Cutting machine tools
- Electrical power transmission
- Program control systems
- Scientific research
- Boring machines
- Series voltage regulation circuits
- Electric heating, lighting
- Experimental setup
- Elevator lighting
- Network technology
